CNC lathe parts processing steps

2023-12-13 10:33:05

Automatic CNC lathe is the 1 kind of use of numerical control technology, CNC lathe parts processing in accordance with the pre-programmed action of the machine tool. It consists of program carrier, input device, CNC unit, servo system, position feedback system and machine tool mechanical parts.

CNC Lathe Parts processing basic knowledge, parts processing steps

In the CNC lathe parts processing parts usually go through the following steps:

1. According to the drawing and process plan of the processed parts, write the program list with the specified code and program format, and record it on the carrier; Don't want to work at the bottom, want to get rid of the status quo, want to learn UG programming, you can add QQ group 868791195 to learn CNC Machining programming technology.

2. Input the program on the program carrier into the CNC unit through the input device;

3. After the CNC unit processes the input program, it sends a signal to the servo system of each coordinate of the machine tool;

4. The servo system drives the moving parts of the machine tool and controls the auxiliary operation according to the signal sent by the CNC unit.

5. Through the machine tool mechanical parts to drive the relative movement of the tool and the workpiece, processing the required workpiece.

6. Detect the movement of the CNC lathe and feed it back to the CNC unit through the feedback device to reduce the machining error. Of course, there is no detection and feedback system for open-loop CNC lathes.