The processing equipment used in lathe processing and its characteristics.

2023-12-13 11:58:43

The processing equipment used in Lathe processing has various types according to the size of the material and the processing method. The types and characteristics of representative processing equipment are described below.

General Lathe

This is by the operator manually move the tool, the replacement of the tool lathe. It is very useful when making complex-shaped parts that are difficult to program, single-piece parts, and trial products that need to be fine-tuned.

CNC Lathe

Using a numerical control lathe, automatic machining can be realized by programming the machining conditions and loading them in advance. Because it runs according to the program, even beginners can process it with a certain degree of accuracy. Suitable for volume products that require the same work to be repeated.

Bench Lathe

As the word "desktop" 1 says, it is the 1 small lathe that can be placed on a table. The usage is the same as that of the general lathe, which is needed when making small parts.

End face lathe

End face lathe is a horizontal lathe used when processing large materials. Its characteristic is that it can prevent the accuracy from decreasing due to the chips, because the chips will not accumulate and can fall down. Since there is no need to remove chips, it can work continuously and efficiently.

Vertical lathe

A vertical lathe is the 1 type of lathe that moves the tool vertically for machining large materials. The deviation due to the center of gravity and centrifugal force can be reduced, and high processing accuracy can be realized.